LED Dimmer | 3-100W | Trailing edge | Universal

Product Description

Universal LED dimmer for 3 to 100 watts of LED lighting, or up to 200 watts of halogen and incandescent lamps. For a group of a few spotlights or a single pendant this is the logical size; if you have more than about fifteen 6 watt spotlights on one dimmer, look at the 250 watt version. It dims from 0 to 100%, and with the trim screw you set the minimum level so the lamps do not flicker at the lowest setting.

This is the flush-mount module of 71 x 71 x 25 mm. You fit it in a standard back box and use the knob and cover frame of your own switch range; according to the manufacturer tested with Berker, Jung, Gira, Peha and Busch-Jaeger. Two-way switching is possible too: connect L1 and L2 as the two-way wires to an ordinary two-way switch and you control the lamp from two places.

It is a trailing edge dimmer (R.C.), which is also printed on the front. So it dims without humming or buzzing. Check with your fixture whether the driver supports this type of dimming.