LED Steplight Steno | 1.5W CCT | IP20 | Motion Sensor
LED Steplight Steno | 1.5W CCT | IP20 | Motion Sensor
- ✓ Free shipping from €50
- ✓ 14-day return policy
- ✓ 5-year warranty
- ✓ Ordered today, shipped tomorrow
Product Description
A self-regulating steplight: the motion sensor is built-in, so no external switching is needed. It reacts to movement within 8 meters and automatically turns off after approximately 30 seconds. This makes it particularly suitable for places where a separate sensor would be too much hassle — a landing, a step, the hallway to the bedroom. Please note that each fixture switches on its own sensor: on a staircase with five units, they will turn on one by one as you walk, not all at once. 1.5W, 90 lumens, and a CCT switch to set the light color during installation. Cut-out size 52 mm and 34 mm recess depth, so little space is needed behind the kick plate. Available in white and black.
Specifications
| SKU | SW-TV-STENO-WIT |
| Warranty | 5 years |
| Material | ABS |
| Wattage | 1.5W |
| Light output | 90 lm |
| Beam angle | 90° |
| Colour rendering (CRI) | ≥80 Ra |
| IP rating | IP20 |
| Cut-out size | 52 mm |
| Recess depth | 34 mm |
| Dimensions | 88 x 88 x 34 mm |
| Voltage | 220-240V |
| Color | White |
| Dimmable | No |
| Light color | Tunable (CCT) |
| Availability | In stock |
Useful for this product
Questions about the LED Steplight Steno
Can the LED Steplight Steno be used in the bathroom?
No. The LED Steplight Steno has IP20 and is not protected against moisture. Use it in dry rooms only, such as the living room, hallway or bedroom.
What hole size and recess depth does the LED Steplight Steno need?
Cut a hole of 52 mm. Above the ceiling you need at least 34 mm of free space (the recess depth). Installation guide →
Do you need a separate LED driver?
No. The LED Steplight Steno connects directly to 220-240V mains voltage.